
150mm — 900mm
Pipe Diameter
WHAT WE OFFER
High-accuracy trenchless installation purpose-built for gravity sewers.
Guided Auger Boring installs pipelines to precise line, level and grade, ideal for gravity sewers and utility crossings. Laser- and optical-guided steering lets gravity pipelines pass under gas mains, water mains, sewers, roads, railways and runways without disturbing the surface above.
THE THREE-STAGE PROCESS
Pilot → auger → pipe.
Accuracy comes from the sequence. A laser-guided pilot tube sets line and grade. The auger follows. The pipe takes the auger’s place. Three stages, one drive.
01
GUIDE THE LINE
Pilot Tube
A steerable pilot tube is installed to line, level and grade using optical or laser guidance. The pilot sets the path for everything that follows. Accuracy is locked in here.
02
CUT THE BORE
Auger Casings
The auger head and casings (containing the auger screws) are installed behind the pilot. Spoil returns on the screw; the pilot leads the casing along the preset line.
03
INSTALL THE PIPE
Product Pipe
The product pipe is pushed into place; the casings and auger screws are removed at the reception pit. The final pipeline sits exactly on the pilot’s line and grade.
BY THE NUMBERS
Guided boring specs
150mm
MIN. PIPE
Smallest GBM drive
900mm
MAX. PIPE
7
PIPE SIZES
150, 225, 300, 450, 500, 600, 900mm
3
STAGE SYSTEM
Pilot, auger, pipe
APPLICATIONS
Where guided boring earns its place.
Five proven uses, picked because precise grade, minimal surface impact and tight launch space all matter.
All Services01
Gravity Sewers
Accurate line, level and grade for flow-by-gravity pipelines
02
Road & Highway Crossings
Under live carriageways, no surface disruption
03
Rail & Runway Crossings
Beneath running lines and airport infrastructure
04
Utility Crossings
Pass under gas, water, electric cables and other sewers
05
Restricted Launch Sites
From manhole chambers, battered pits or segmental shafts
PLANT & EQUIPMENT
Six pipe sizes, one guided system.
01
TUNNEL ENGINEERING GBMS
Guided Boring Machines for 150, 225, 300, 450, 500, 600 and 900mm pipe seven standard sizes in the fleet.
02
OPTICAL & LASER GUIDANCE
Precise line, level and grade control from launch pit to reception the grade is locked on stage one.
03
POWER CUTTER HEADS
PCHs in 450 and 600mm that extend into pilot tube microtunnelling in soft, unstable ground.
04
AUGER CASINGS & SCREWS
Casings and flight augers across the full pipe-size range, sized to each drive.
05
HYDRAULIC JACKING
Thrust gear sized to the pipe, launched from pits, segmental shafts or manhole chambers.
06
PIPE MATERIAL RANGE
Vitrified clay and concrete jacking pipes, or steel sleeves as duct conduits. Pick the material to suit the install.

“Line, level, and grade maintained throughout the drive, crossing beneath live services without surface disruption.”
YOUR NEXT CROSSING
Tell us about the ground.
Send us your line, grade and pipe requirements and we’ll come back with a GBM, a launch strategy and a programme for the drive.
Or call direct
150mm
900mm
PIPE DIAMETER RANGE